Small precision molded plastic parts

Design Tip

Designing Molded Parts for Pad Printing

A logo, part number or warning label might seem like a finishing detail. In reality, how a part is designed has a big impact on how well it can be printed.

Pad printing is one of the most versatile ways to mark molded plastic parts. But crisp, durable results start in CAD, not at the printer.

At Titan Manufacturing, we mold and pad print parts in-house, so we see how small design choices affect the final mark.

How Pad Printing Works

Pad printing transfers ink from an etched plate to the part using a soft silicone pad.

  1. Ink fills the etched artwork on a printing plate.
  2. The silicone pad presses onto the plate and picks up the ink.
  3. The pad presses onto the part, flexing to match its surface, and releases the ink.

Because the pad flexes, it can print on curved, recessed and slightly irregular surfaces that other methods struggle with.

Design Tips for Better Pad Printing

1. Plan the Print Area Early

Identify where markings will go while the part is still being designed. A defined, relatively smooth print area produces sharper results than placing artwork over ribs, edges or sudden changes in height.

2. Watch Surface Texture

Heavy texture can break up fine lines and small text. If a part needs both texture and a crisp mark, consider keeping the print area smooth or lightly textured.

3. Mind the Curves

Pad printing handles gentle curves well, but tight compound curves can distort artwork. Keeping the print area on a simpler surface improves consistency.

4. Keep Clear of Parting Lines and Gate Marks

Parting lines, gate vestiges and ejector pin marks can interfere with ink transfer. Placing artwork away from these features avoids defects. This is easiest to plan before the mold is built.

5. Consider the Resin

Ink adhesion varies by material. Some resins accept ink easily, while others need surface treatment. Discuss printing requirements when choosing a resin, not after parts are molded.

6. Size Text for Readability

Very small text and hairline details are harder to reproduce consistently. If a mark must be readable for regulatory or safety reasons, give it enough size and contrast.

Prepare Artwork the Right Way

  • Supply vector artwork (AI, EPS, PDF or SVG)
  • Convert fonts to outlines
  • Specify ink colours
  • Mark critical dimensions and placement on a drawing

Clear artwork and placement drawings shorten setup and reduce first article revisions.

Why Print Where You Mold

When molding and printing happen at different suppliers, parts are packed, shipped, unpacked and inspected again. Every step adds time, cost and risk of damage.

Printing at Titan right after molding keeps parts in one controlled process under our ISO 9001:2015 quality system. One schedule, one PO, and one team accountable for the finished part.

Design It to Be Printed

The best printed parts are designed with printing in mind from the start. If your part needs logos, markings or labels, involve us early and we'll help you plan the print area, resin and artwork for clean, durable results.